Professional set of Capacitor Pack for Amiga 600 recapping KIT NEW Instruction

Description

A set of new 19 pcs branded, electrolytic capacitors to perform a full recap of the Amiga 600 600HD.
They fit the following motherboard revisions: 1, 1.1, 1.3, 1.5, 2B, 2D.
It is a carefully selected, through years of experience in the service of electronic equipment, a set of aluminum, branded electrolytic Low ESR capacitors:
SMD SANYO LowESR:
- FP series
4 x 100uF 6.3v
ESR 0.26 Ohm 105C 2000h
- FP series
4 x 10uF 35v
ESR 0.85 Ohm 105C 2000h
- FP series
5 x 22uF 35v
ESR 0.36 Ohm 105C 2000h
- FP series
2 x 47uF 16v
ESR 0.26 Ohm 105C
THT SANYO:
- NHG series
2 x 1000uF 10v
(10X12.5mm) 105C 2000h
- FC series
2 x 470uF 16v
ESL 0.090 Ohm (10X12.5mm) 105C 3000h
EVERY SET IS NEW !!!
For each purchase, I add detailed instructions with the location of the capacitors that need to be replaced. I can also advise on assembly.
When can capacitors be replaced?
If our Commodore AMIGA:
it has a long run time
when the computer has not been used for several years
artifacts are displayed on the screen
there are audio distortions
there are disturbances on the screen during the operation of the disk drive (changes in screen brightness and stripes)
accidental restarts and \ or system hangs occur
poured, swollen, or optically damaged capacitors on the motherboard
and for the serenity of a retro fan